Wii burned games loader

Press "2" to finish the installation. Regardless of what you're planning on using the custom firmware for, do not press "1. Press any button on the disclaimer screen to continue. Set your installer menus. Press "A" to begin the installation, then highlight Slot and press "A" again. This will install d2x using the settings you entered.

The installation may take a little while to complete. You'll need to install it again with slightly different settings. Set your installer menus again. This will install d2x again in Slot You'll need it installed in both slots before you can use the CFG Loader. Part 3. Plug your formatted external hard drive or flash drive into your Wii. Plug this in before you launch CFG Loader for the first time. Use the bottom USB port on the back of the Wii. If you're prompted by your Wii to format the drive, select "Cancel.

Select "USB" when prompted. This will set CFG to load backups from your external hard drive or flash drive. When prompted to select your partition, you should only have one available. Select it to continue. Ensure IOS is selected and start the program. This will launch the CFG Loader with your settings. Save your settings. You'll want to save your device and IOS settings so you're not prompted for them each time you start: [5] X Research source Point at the bottom of the screen to open the menu.

Select "Settings" and then "System. Insert a game that you want to copy into your Wii. Insert the disc and it will appear in the CFG Loader program. You'll be using this homebrew program to rip the games from your Wii and GameCube discs to your external hard drive or your flash drive.

This will open the installation screen for the game that is inserted. Click "Install. This may take a while to complete, especially for newer, larger games. Select an installed game in CFG Loader. Once you have some games installed, they'll appear in the main CFG Loader window. Select one to view details and launch it. Press "A" to launch the game.

With the game selected, press "A" to start playing. You'll see some text as the game loads, and then it will start.

Continue installing games. You can keep installing games from any disc, legitimate or burned. All of the games will be added to your external hard drive or flash drive, and you won't need the discs to play them. Part 4. Consider using the USB Loader instead of burning your games. This means that a burnt disc is useless on Wiis that were made in or later. If you download games, you can copy them to the external hard drive or flash drive that your USB Loader uses and they will appear in your USB Loader program library.

You don't need to burn them just to rip them onto your Wii. Obtain some Wii game image files. If you do want to burn games to disc instead of using your USB Loader, you'll need the game image files. There are a couple of ways you can obtain these: Wii and GameCube ISO files can be downloaded from many different torrent sites.

See Download Torrents for details on finding and downloading torrents. It is illegal in most areas to download games you do not own. If you followed the above methods, you can use games that you've installed to your external hard drive or flash drive with the USB Loader. Plug the external hard drive or the flash drive into your computer and open the "games" directory. Drag the file you want to your computer.

It may take a while to copy. Convert image files copied from your external hard drive or flash drive. If you ripped games using your Wii and copied the files to your computer, you'll likely notice that the files are in WBFS format.

This will need to be converted to ISO before you can burn it: Visit wbfstoiso. Run the installer after downloading it and follow the prompts. No adware will be installed.

You can click the "Open" button to browse for it. Click "Convert" to begin converting the file. This may take a while to complete. Visit imgburn. Download the latest version from the ImgBurn website. Start the ImgBurn installation process. Double-click the installer to begin the installation.

Uncheck the Ask Toolbar ads while installing. After you select the location to install ImgBurn, you'll see a screen for the Ask Toolbar. Make sure to uncheck all of the boxes before proceeding. Launch ImgBurn after installing. Once the installation is finished, launch ImgBurn from the shortcut on your desktop. Select "Write image file to disc" from the ImgBurn menu. This will open the disc writer tool. Be aware that if your Wii is newer than , the burnt discs will not work.

Click the Browse button to navigate to it, or drag it into the window. Select a low write speed. To help ensure that the burn process works, select a slow writing speed such as 1X. This will result in a longer burn but will increase your chances of the disc working. Click the Burn button in the lower-left corner. This will begin writing the file to your disc. Wait for the burn to complete. This may take a while, especially for larger games. The disc will eject when it is finished.

Load the burnt disc with your game files into your Wii. Once the disc is finished burning, you can insert it in your Wii's disc drive. This will allow you to play it without having to install any additional hacks.

See the previous section for details. Anything else is , and cannot read DVD. Not Helpful 12 Helpful Not Helpful 9 Helpful It is probably because it is unlicensed, and as the Wii console reads, it detects no license and concludes it is pirated, illegal or an unauthorized game copy.

Not Helpful 2 Helpful 7. Your Wii must be modded. Modding it helps the USB loader skip the checks to see if it is unauthorized. Not Helpful 4 Helpful 9. Is it possible to burn the games to a disc without a USB Loader?

If done properly, it shouldn't affect your saved files, though it's always a good idea to back up your files beforehand. Not Helpful 1 Helpful 6. Yes, that should work just fine. Memorex is a very common brand of blank disc. Not Helpful 2 Helpful 5. If that doesn't work, try reinstalling the ISO from another source. Not Helpful 2 Helpful 3.

You can save games to an SD card, but those usually don't have a lot of space, so consider using an USB drive instead. Not Helpful 1 Helpful 0. It sends me back to the Homebrew channel menu. Most probably the file is corrupted.

Try to load some other game. If it happens with all of your games, then you have to install the USB loader again. Not Helpful 1 Helpful 2. Include your email address to get a message when this question is answered. You Might Also Like How to. How to. About This Article. Written by:. Co-authors: Updated: January 12, Categories: Nintendo Wii. Article Summary X To burn Wii games to disc, start by downloading the game image files from a torrent site.

Italiano: Masterizzare un Videogioco per Wii. Deutsch: Wii Spiele brennen. Thanks to all authors for creating a page that has been read 1,, times. Did this article help you? Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy. What does this mean to you, the end user? It means that once you have hacked your Wii for homebrew software you can easily add in a loader and a cheap USB drive for game backups and speedy playback.

How speedy? When loading a new level in Super Smash Bros. Brawl off the disc, for example, it can take up to 20 seconds or more; the same load time off a USB HDD is usually around seconds. Check out the video below to see it in action if you need a little convincing:.

Play Video. USB Loader GX is user friendly, feature rich, and offers a good balance between usability and eye candy. Remember, keep the folder structure the same! A channel is actually an application installed on the Wii. Installing the USB Loader GX channel instead of the of the forwarder takes up more system memory and allows for fewer customization options and no cover art! Installing it as a forwarder is preferred as it allows you to save settings and download cover and disc art.

Start up the Wii and run the Homebrew channel. Go ahead and format the drive in WBFS format. All the backing up and loading is done with the Wii disc drive and the external HDD. Whenever you put a physical disc in the Wii drive while the loader is active it will prompt you to either Install or Mount mounting will launch the game without copying it to the disc. Notice anything peculiar? The game is only 0. Even a GB hard drive can hold more Wii games than you could even get around to playing.

Click OK and watch the transfer bar slide by, for a small game like Wii Sports Resort it should take only a minute or two. When cover art is missing you just get a box cover with a question mark on it. Press 1 on your Wiimote to access the Cover Download menu. Whether your get the normal covers or the 3D covers is a personal choice. Make sure to download both the covers and the disc images if you want to see the disc art when you go to load a game, like so:.

Have an awesome loader to recommend or other Wii hack to share? Sound off in the comments and share the gaming goodness with your fellow readers. Use Google Fonts in Word. Use FaceTime on Android Signal vs. Customize the Taskbar in Windows What Is svchost.

Best Smartwatches. Best Gaming Laptops. Best Smart Displays. Best Home Security Systems. Best External Solid State Drives. Best Portable Chargers. Best Phone Chargers. Best Wi-Fi Range Extenders. Best Oculus Quest 2 Accessories. Best iPad Air Cases. Awesome PC Accessories.